How to Replace Screen Mesh Cloth of Rotary Vibrating Screen?

There will be screen mesh damage or irregularity phenomenon if rotary vibrating sieve has been used for a long period of time, thus we need to replace screen mesh cloth, the method is shown as follows:

1. First loosen the screw of rotary vibrating screen clamp by wrench, take down the upper frame, then you can take down the damaged screen mesh cloth and put on a new mesh cloth.

2. Put the new mesh cloth smoothly on the coarse mesh cloth, then press the fine mesh cloth on the net rack by tension strip ,tighten the tension strip by using a cross screwdriver, when you are in the process of gradually tightening ,you can tension the fine mesh cloth evenly lightly by hand all round, thus the well tighten fine mesh cloth will be very flat and tight which will increase material screening percentage and achieve the ideal screening effect.

3.After the fine screen mesh cloth is well packed, leave 2 centimeters of extra mesh cloth around, then cut off the rest of them.

4. Reput the clamp between the two screen frame, tap the clamp by soft rubber hammer while tight it ,thus the bolt will be more tight. Till now the whole screen mesh cloth replacement is finished.
Note: when feeding the rotary vibrating screen, please do remember material feeding must be well-proportioned and don not feed too much material one time, otherwise it will not only affect the screening effect but also will shorten the service life of the rotary vibrating screen.